The LNM Institute of Information Technology

Deepak Rajendra Unune

deepak.unune@lnmiit.ac.in

Date of joining:

20-07-2016

Department:

Mechanical-Mechatronics Engineering

Summary

Currently, working as an Assistant Professor in Mechanical-Mechatronics Engineering in the LNM Institute of Information Technology, Jaipur. Awarded with Marie Skłodowska-Curie Actions Individual Fellowship and invited for 2 years of research work at the University of Sheffield. PhD, from Malaviya National Institute of Technology, Jaipur, India. Publication summary: International Journals 40+; International Conferences: 20+ Research Area: Advanced Machining, electrical discharge machining, Micro-machining, hybrid machining processes, finishing processes, Submerged arc welding, Coating of Titanium Implants. Key Skills: Project Management, Research aptitude, Teaching is my passion, CNC programming and machining

Biography

Dr. Deepak Rajendra Unune is an Assistant Professor within the Department of Mechanical-Mechatronics Engineering at The LNM Institute Information of Technology, Jaipur, India. With a strong academic background, he obtained his Ph.D. from the Malaviya National Institute of Technology, Jaipur, India, in 2016, specializing in the field of manufacturing engineering. Dr. Unune's academic journey has been marked by significant achievements and international recognition. Notably, he was awarded the prestigious Marie Skłodowska-Curie Actions Individual Fellowship from European Commision, which afforded him the opportunity to conduct groundbreaking research at the University of Sheffield, UK from 2019 to 2021. His research contributions during this period have significantly enriched the field of mechanical engineering perticulary in machining technologies. With over 13 years of teaching and research experience, Dr. Unune has emerged as a distinguished scholar in his field. His expertise spans a wide range of areas, including CNC machining, micro-machining processes, electro-discharge machining (EDM), micro-EDM, hybrid machining processes, and submerged arc welding. He has authored and co-authored over 60 research publications in reputable peer-reviewed journals and conferences and also authored 7 book chapters. He has received more than 1100 google scholar citations with 21 h-index thereby cementing his reputation as a prolific researcher and academician. Dr. Unune's passion for advancing knowledge and innovation in mechanical engineering is evident in his dedication to teaching, research, and scholarly activities. His commitment to excellence and his contributions to the academic community continue to inspire both students and fellow researchers alike.

Research Area

Electrical Discharge Machining, CNC machining, Hybrid machining, Sustainable machining.

Personal information

Name

Designation

Department

ORCID

Scopus_link

Website

Dr. Deepak Rajendra Unune

Associate Professor

Mechanical-Mechatronics Engineering

https://orcid.org/0000-0002-9341-1962

57053446400

Education

	Degree/Diploma	Institute/ Organization	Year	Branch/Specialization
1	Post Doctoral Research	University of Sheffield, UK	2021	Materials Science and Engineering: Bioengineering
2	Ph. D. Doctor of Philosophy	Malaviya National Institute of Technology, Jaipur	2016	Mechanical Engineering
3	M. Tech. Master of Technology	Government College of Engineering, Karad, Maharashtra	2011	Mechanical-Production Engineering
4	B. Tech. Bachelor of Technology	Rajarambapu Institute of Technology, Islampur, Sangli	2007	Mechanical Engineering

Projects

	Name of Project	Total Cost of Project	Funding Agency	Duration From	Duration To
1	EDiMPlant- Marie Curie Individual Fellowship	20000000	RESEARCH EXEXUTIVE COMMITTEE - European Commission	2019	2021
2	Fabrication and finishing of micro-channels for micro-heat exchangers and micro-reactors (EMR/2016/003372), SERB under Extra Mural Research funding (EMR) scheme.	4492000	DST	2017	2020

Experience

	Name of Organization	Post/Designation	Duration From	Duration To
1	University of Sheffield, UK	Marie-Curie Fellow	2019	2021
2	The LNM Institute of Information Technology, Jaipur	Assistant Professor	2016	2024
3	Rajarambapu Institute of Technology, Islampur, Sangli	N/A	2011	2013
4	Bharat Forge Ltd. Pune	N/A	2007	2008

Publications

1	Nikhil Jain, Jinesh Kumar Jain, Pravin Pandit Harane, D.R.Unune, “Application of a novel non-edible oil-based water-in-oil nano-emulsion as a dielectric for the amelioration of electrical discharge machining performance”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Volume 45, pp. 379 https://doi.org/10.1007/s40430-023-04302-x . (Springer, Q2, SCI-Indexed, IF:2.2 JUN 2023 IndexedIn : [WoS] DOI : 10.1007/s40430-023-04302-x,
2	S. N. Sawant, S. K. Patil, D.R. Unune, S. Wojciechowski , Effect of copper, tungsten copper and tungsten carbide tools on micro-electric discharge drilling of Ti-6Al-4V alloy”, Journal of Materials Research and Technology. (Elsevier, Q1, SCI-Indexed, IF:6.627) MAY 2023,
3	A. S. Kulshrestha, M. Singh, D. R. Unune, A. K. Dargar, “An investigation on tool wear rate in the electrical discharge face grinding process for the machining of Monel 400”, International Journal of Abrasive Technology, Vol. 11, No. 3, pp 196-211, https://doi.org/10.1504/IJAT.2023.130844 (Inderscience, Q3, Scopus-indexed) MAY 2023 ,
4	Akshat Srivastava Kulshrestha, Deepak Rajendra Unune, Ashok Kumar Dargar, “Investigation and optimization of electro discharge face grinding of monel 400 alloy using response surface methodology and genetic algorithm”, Sadhana, Vol. 48 (127). https://doi.org/10.1007/s12046-023-02194-0 (Springer, Q2, SCI indexed, IF: 1.6) JULY 2023 ,
5	P.O.Sharma, D.R.Unune, “Amelioration of pool boiling performance using hybrid nanofluids over EDMed surfaces, Journal of Thermal Analysis and Calorimetry, Volume 148, pp. 2657–2676. (Springer, Q2, SCI-Indexed, IF:4.75 MAR 2023 ,
6	P.O.Sharma, D.R.Unune , “Augmentation of pool boiling performance using Ag/ZnO hybrid nanofluid over EDM assisted robust heater surface modification”, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Volume 655, 20 December 2022, 130150. (Elsevier, SCIIndexed, IF:5.518) https://doi.org/10.1016/j.colsurfa.2022.130150 DEC 2023 ,
7	A.S. Kulshrestha, A.S. Mertiya, D.R. Unune, A.K. Dargar , “A review on electrical discharge grinding: Current status and future perspectives”,, Surface Review and Letters, (WorldScientific, SCI-Indexed, IF:1.240). https://doi.org/10.1142/S0218625X23300034 IndexedIn : [WoS] DOI : 10.1142/S0218625X23300034,
8	P.P. Harane, S. Wojciechowski, D.R. Unune, “Investigating the effect of different tool electrodes in electric discharge drilling of Waspaloy on process responses”, Journal of Materials Research and Technology. (Elsevier, SCI-Indexed, IF:6.627) https://doi.org/10.1016/j.jmrt.2022.08.015 AUG 2022 IndexedIn : [WoS] DOI : 10.1016/j.jmrt.2022.08.015,
9	D.R. Unune, G.R. Brown, G.C. Reilly, “Thermal based surface modification techniques for enhancing the corrosion and wear resistance of metallic implants: A review”, Vacuum, Vol.203, September 2022, 111298. (Elsevier, SCI-Indexed, IF:4.11). https://doi.org/10.1016/j.vacuum.2022.111298 JUN 2022 IndexedIn : [WoS] DOI : 10.1016/j.vacuum.2022.111298,
10	D.Y.Pimenov, M. Mia, M.K. Gupta, Á.R. Machado, G. Pintaude, D.R. Unune, N. Khanna, A.M. Khan, Í. Tomaz, S. Wojciechowski, M. Kuntoglu , “Resource saving by optimization and machining environments for sustainable manufacturing: A review and future prospects”, enewable and Sustainable Energy Reviews, Volume 166, September 2022, 112660. (Elsevier, SCI-Indexed, IF:16.79). https://doi.org/10.1016/j.rser.2022.112660 SEPT 2022 IndexedIn : [WoS] DOI : 10.1016/j.rser.2022.112660,
11	S.K. Singh, H.S. Mali, D.R. Unune, S. Wojciechowski, D. Wilczynski , “Application of Generalized Regression Neural Network and Gaussian Process Regression for Modelling Hybrid Micro-Electric Discharge Machining: A Comparative Study”, Processes, 10(4), 755. MPDI, SCIIndexed, IF:3.353). https://doi.org/10.3390/pr10040755 APRIL 2022 IndexedIn : [WoS] DOI : 10.3390/pr10040755,
12	S.K. Singh, H.S. Mali, D.R. Unune, A.M. Abdul-Rani, S. Wojciechowski , “Material independent effectiveness of workpiece vibration in µ-EDM drilling”, “Material independent effectiveness of workpiece vibration in µ-EDM drilling”, Journal of Materials Research and Technology, Vol. 18, pp. 531-546. (Elsevier, SCI-Indexed, IF:6.627) https://doi.org/10.1016/j.jmrt.2022.02.063 FEB 2022 DOI : 10.1016/j.jmrt.2022.02.063,
13	A.S. Mertiya, A.Upadhyay, K.Nirwan, P.P. Harane, A.M. Abdul-Rani, C.I. Pruncu, D.R. Unune, “Development and Investigation of an Inexpensive Low Frequency Vibration Platform for Enhancing the Performance of Electrical Discharge Machining Process”, Materials, Vol. 14(20), pp.6192;. (MPDI, SCI-Indexed, IF:3.748). https://doi.org/10.3390/ma14206192 OCT 2021 IndexedIn : [WoS] DOI : 10.3390/ma14206192,
14	M. Al-Amin, A.M. Abdul-Rani, M. Danish, S. Rubaiee, A. Mahfouz, H. M. Thompson, S. Ali, D. R. Unune, M.H Sulaima , “Investigation of Coatings, Corrosion and Wear Characteristics of Machined Biomaterials through Hydroxyapatite Mixed-EDM Process: A Review”, “Investigation of Coatings, Corrosion and Wear Characteristics of Machined Biomaterials through Hydroxyapatite Mixed-EDM Process: A Review”, Materials, Vol. 14 (13), pp. 3597. (MPDI, SCI-Indexed, IF: 3.748). https://doi.org/10.3390/ma14133597 JUN 2021 DOI : 10.3390/ma14133597,
15	S. Barewar, A. Kotwani, S.S. Chougule, D.R. Unune, Investigating a novel Ag/ZnO based hybrid nanofluid for sustainable machining of inconel 718 under nanofluid based minimum quantity lubrication, Journal of Manufacturing Processes,, Investigating a novel Ag/ZnO based hybrid nanofluid for sustainable machining of inconel 718 under nanofluid based minimum quantity lubrication, Journal of Manufacturing Processes, 66, 313-324. (Elsevier, SCI-Indexed, IF: 5.684) https://doi.org/10.1016/j.jmapro.2021.04.017 APRIL 2021 IndexedIn : [WoS] DOI : 10.1016/j.jmapro.2021.04.017,
16	D.R. Unune , Effect of the tool surface area and workpiece vibration on the µEDM performance, Surface Review and Letters, Effect of the tool surface area and workpiece vibration on the µEDM performance, Surface Review and Letters, (WorldScientific, SCI-Indexed, IF:1.240). https://doi.org/10.1142/S0218625X21500839 MAY 2021 IndexedIn : [WoS] DOI : 10.1142/S0218625X21500839,
17	D.R. Unune, H.S. Mali , Dimensional accuracy and surface quality of micro-channels with low-frequency vibration assistance in micro-electro-discharge milling, Advances in Materials and Processing Technologies,, Dimensional accuracy and surface quality of micro-channels with low-frequency vibration assistance in micro-electro-discharge milling, Advances in Materials and Processing Technologies, (Taylor and Francis, ESCI & Scopus-Indexed,) https://doi.org/10.1080/2374068X.2020.1835008 OCT 2020 IndexedIn : [WoS] DOI : 10.1080/2374068X.2020.1835008,
18	S. Jain, S. Saboo, C.I. Pruncu, D.R. Unune, “Performance Investigation of Integrated Model of Quarter Car Semi-Active Seat Suspension with Human Model”, “Performance Investigation of Integrated Model of Quarter Car Semi-Active Seat Suspension with Human Model”, Applied Sciences, 10 (9), 3185. (MDPI, SCI-Indexed, IF: 2.838) https://doi.org/10.3390/app10093185 MAY 2020 IndexedIn : [WoS] DOI : 10.3390/app10093185,
19	V. Lalwani, P. Sharma, C.I. Pruncu, D.R. Unune, “Response surface methodology and artificia neural network-based models for predicting performance of wire electrical discharge machining of Inconel 718 alloy”, Journal of Manufacturing and Materials Processing, 4(2), 44 (MDPI, ESCI, Scopus Indexed). https://doi.org/10.3390/jmmp4020044 MAY 2020 IndexedIn : [WoS] DOI : 10.3390/jmmp4020044,
20	A.A, Mulla, D.R Unune , “Performance of quarter-car semi-active suspension with skyhook, fuzzy logic, adaptive neuro-fuzzy inference system control strategies for ISO-classified road disturbance”, SAE Technical Papers, 2020-01-5040, 2020, http://doi.org/10.4271/2020-01-5040 MAY 2020 IndexedIn : [Scopus] DOI : 10.4271/2020-01-5040,
21	A Choudhary, M. Kumar, D.R. Unune , “Influence of novel water cooled ASAW process on chemical composition and impact toughness of AISI 1023 weld metal”, “Influence of novel water cooled ASAW process on chemical composition and impact toughness of AISI 1023 weld metal”. Construction and Building Materials, Vol. 228, pp. 1-11. (Elsevier, SCI-Indexed, IF: 7.693) https://doi.org/10.1016/j.conbuildmat.2019.116725 AUG 2019 IndexedIn : [WoS] DOI : 10.1016/j.conbuildmat.2019.116725,
22	A. Shukla, A. Kothwani, D.R. Unune , “Performance comparison of dry, flood and vegetable oil based minimum quantity lubrication environments during CNC milling of Aluminium 6061”, “Performance comparison of dry, flood and vegetable oil based minimum quantity lubrication environments during CNC milling of Aluminium 6061”, Materialstoday Proceedings, Vol. 21 (3), pp. 1483-1488. https://doi.org/10.1016/j.matpr.2019.11.060 2019 IndexedIn : [Scopus] DOI : 10.1016/j.matpr.2019.11.060,
23	A. Choudhary, M. Kumar, M. Gupta, D.R. Unune, M. Mia , “Mathematical Modeling and Intelligent Optimization of Submerged Arc Welding Process Parameters Using Hybrid PSO-GA Evolutionary Algorithms”, Neural Computing and Applications, Vol. 32, pp. 5761–5774. (Springer, SCIE-Indexed, IF: 5.606). https://doi.org/10.1007/s00521-019-04404-5 SEPT 2019 IndexedIn : [WoS] DOI : 10.1007/s00521-019-04404-5,
24	S.K. Rajak, A. Aherwar, D.R. Unune, M. Mia, C.I. Pruncu, “Evaluation of Copper-Based Alloy (C93200) Composites Reinforced with Marble Dust Developed by Stir Casting under Vacuum Environment”, Materials, Vol. 12 (10), pp. 1574. (MPDI, SCI-Indexed, IF: 3.748) https://doi.org/10.3390/ma12101574 MAY 2019 IndexedIn : [WoS] DOI : 10.3390/ma12101574,
25	D.R. Unune, C.K. Niral and H.S. Mali, “ANN-NSGA-II Dual approach for modeling and optimization of control factors in abrasive mixed electro discharge diamond grinding of Monel K-500”, Engineering Science and Technology, Elsevier. doi: 10.1016/j.jestch.2018.04.014 (ESCI-Indexed) MAY 2018 IndexedIn : [WoS] DOI : 10.1016/j.jestch.2018.04.014,
26	A. Choudhary, M. Kumar, D.R. Unune, “A novel torch for enhanced metal deposition with low heat input in advanced submerged arc welding”,, International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-018-1944-7 (Springer, SCI-Indexed, Impact Factor:2.209) MAR 2018 IndexedIn : [WoS] DOI : 10.1007/s00170-018-1944-7,
27	A. Aherwar, A. Patnaik, D.R. Unune, “Selection of Molybdenum Filled Hip Implant Material Using Grey Relational Analysis Method”, In P. Vasant, S. Alparslan-Gok, & G. Weber (Eds.), Handbook of Research on Emergent Applications of Optimization Algorithms (pp. 728-749). Hershey, PA: IGI Global. doi:10.4018/978-1-5225-2990-3.ch029 FEB 2018 ,
28	D.R. Unune and A. Aherwar, “Optimization of Micro Electric Discharge Drilling for Fabrication of Enhanced Quality Micro-Holes in Inconel 718 Superalloy”, In P. Vasant, S. Alparslan-Gok, & G. Weber (Eds.), Handbook of Research on Emergent Applications of Optimization Algorithms (pp. 728-749). Hershey, PA: IGI Global. doi:10.4018/978-1-5225-2990-3.ch03 FEB 2018 IndexedIn : [Scopus] DOI : 10.4018/978-1-5225-2990-3.ch03,
29	D.R. Unune, “Hybrid micro-machining processes”, “Hybrid micro-machining processes”, in A. Pnade (Eds.), Modern Machining Processes, Anne Books Pvt. Ltd., New Delhi. SEPT 2018,
30	D.R. Unune and H.S. Mali , “Accuracy and Quality of Micro-holes in Vibration Assisted Micro-Electro-Discharge Drilling of Inconel 718”,, “Accuracy and Quality of Micro-holes in Vibration Assisted Micro-Electro-Discharge Drilling of Inconel 718”, Measurement. https://doi.org/10.1016/j.measurement.2018.11.067 (Elsevier, SCI-Indexed, Impact Factor:2.218) NOV 2018 IndexedIn : [WoS] DOI : 10.1016/j.measurement.2018.11.067,
31	H.S. Mali and D.R. Unune, “Machinability of Nickel-based superalloys”, “Machinability of Nickel-based superalloys”, Materials Science and Materials Engineering, Elsevier. doi: 10.1016/b978-0-12-803581-8.09817-9 SEPT 2017 ,
32	A. Choudhary, M. Kumar, D.R. Unune , “Investigating effects of resistance wire heating on AISI 1023 weldment characteristics during ASAW”, “Investigating effects of resistance wire heating on AISI 1023 weldment characteristics during ASAW”, Materials and Manufacturing Processes. https://doi.org/10.1080/10426914.2017.1415441 (Taylor and Francis, SCI-Indexed, Impact Factor:2.274) NOV 2017 IndexedIn : [WoS] DOI : 10.1080/10426914.2017.1415441,
33	D.R. Unune and H.S. Mali , “Experimental investigation on low-frequency vibration assisted µ-ED milling of Inconel 718,”, Materials and Manufacturing Processes. https://doi.org/10.1080/10426914.2017.1388516 (Taylor and Francis, SCI-Indexed, Impact Factor:2.274) NOV 2017 IndexedIn : [WoS] DOI : 10.1080/10426914.2017.1388516,
34	C.K. Nirala, D.R. Unune, H. Sankhala , “Virtual Signal Based Pulse Discrimination in Micro-Electro-Discharge Machining,”, “Virtual Signal Based Pulse Discrimination in Micro-Electro-Discharge Machining,” Journal of Manufacturing Science and Engineering, Vol. 139, pp. 1-7. https://doi.org/10.1115/1.4037108 (ASME, SCI-Indexed, Impact Factor:3.48) JULY 2017 IndexedIn : [WoS] DOI : 10.1115/1.4037108,
35	D.R. Unune and H.S. Mali , “Parametric modelling and optimization for abrasive mixed surface electro discharge diamond grinding of Inconel 718 using response surface methodology,”, International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-017-0806-z (Springer, SCI-Indexed, Impact Factor:2.209) MAY 2017 IndexedIn : [WoS] DOI : 10.1007/s00170-017-0806-z,
36	C. Nayak, A. Singh, H. Choudhary, D.R. Unune, “An investigation of effects of amputee’s physiological parameters on maximum pressure developed at the prosthetic socket interface using artificial neural network”, Technology and Health Care. https://doi.org/10.3233/THC-160683 (IOS Press, SCI-Indexed, Impact Factor:0.678) MAR 2017 IndexedIn : [WoS] DOI : 10.3233/THC-160683,
37	D.R. Unune and H.S. Mali, “Experimental investigation into low-frequency vibration assisted micro-WEDM of Inconel 718”, “Experimental investigation into low-frequency vibration assisted micro-WEDM of Inconel 718” Engineering Science and Technology, an International Journal, Vol.20 (1), pp. 222-231. https://doi.org/10.1016/j.jestch.2016.06.010 (Elsevier, ESCI-Indexed) JAN 2017 IndexedIn : [WoS] DOI : 10.1016/j.jestch.2016.06.010,
38	D.R. Unune, Mohsen Barzani, S.S. Mohite, and H.S. Mali , “Fuzzy logic based model for predicting material removal rate and average surface roughness of machined Nimonic 80A using abrasive mixed electro discharge diamond surface grinding”, Neural Computing and Applications. https://doi.org/10.1007/s00521-016-2581-4 (Springer, SCIE-Indexed, Impact Factor: 2.505) OCT 2016 IndexedIn : [WoS] DOI : 10.1007/s00521-016-2581-4,
39	B.P. Pathri, A.K. Garg, D.R. Unune, H.S. Mali, S.S. Dhami, R. Nagar , “Design and fabrication of a strain gauge type 3-axis milling tool dynamometer: fabrication and testing”, International Journal of Materials Forming and Machining Processes, Vol. 3 (2), pp.1-15. IGI Global. https://doi.org/10.4018/IJMFMP.2016070101 JULY 2016 IndexedIn : [Scopus] DOI : 10.4018/IJMFMP.2016070101,
40	D.R. Unune, V.P. Singh, and H.S. Mali, “Experimental investigations of abrasive mixed electro discharge diamond grinding of Nimonic 80A”, “Experimental investigations of abrasive mixed electro discharge diamond grinding of Nimonic 80A”, Materials and Manufacturing Processes, Vol.31, pp.1718-1723. https://doi.org/10.1080/10426914.2015.1090598 (Taylor and Francis, SCI-Indexed, Impact Factor:2.274) APRIL 2016 IndexedIn : [WoS] DOI : 10.1080/10426914.2015.1090598,
41	D.R. Unune and H.S. Mali, “Artificial neural network–based and response surface methodology–based predictive models for material removal rate and surface roughness during electro-discharge diamond grinding of Inconel 718”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 230, No. 11, pp.2082-2091. https://doi.org/10.1177/0954405415619347 (SAGE, SCI-Indexed, Impact factor:1.366 ) OCT 2015 IndexedIn : [WoS] DOI : /10.1177/0954405415619347,
42	D.R. Unune and H.S. Mali , A study of multiobjective parametric optimization of electric discharge diamond cut-off grinding of Inconel 718”, International Journal of Abrasive Technology, Vol.7, No.3, pp.187-199. https://doi.org/10.1504/IJAT.2016.078281 (Inderscience, Scopus-indexed) JUN 2015 IndexedIn : [Scopus] DOI : 10.1504/IJAT.2016.078281,
43	B. Prajwal, D.R. Unune, A. Aherwar, Jaikishan, “Modelling, simulation and validation of results with different car models using wind tunnel and Star-CCM+”, Journal of the Serbian Society for Computational Mechanics , Vol. 9, No.1, pp. 46-56. (Scopus-indexed) MAY 2015 IndexedIn : [Scopus],
44	D.R. Unune and H.S. Mali, “Current status and applications of hybrid-micro-machining processes: A review”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol.229, No. 10, pp.1681-1693. https://doi.org/10.1177/0954405414546141 (SAGE, SCI-Indexed, Impact factor:1.366) MAR 2015 IndexedIn : [WoS] DOI : 10.1177/0954405414546141,

Expert lectures

	Month	Year	Information
1	February	2023	Delivered a keynote talk on "Electrical discharge machining: Technology and Research Perspectives" at 2nd International Conference on Emerging Trends in Engineering, Science and Technologies organized by Poornima University Jaipur (24th-25th Feb, 2023). FEB 2023
2	March	2022	Dr. Deepak Rajendra Unune has presented a one-day seminar on "Design of Experiments: Methods and Approaches", on 4th March 2022 for PG & PhD scholars of LNMIIT, Jaipur MAR 2022
3	January	2022	Delivered a talk on "Surface modifications of Ti6Al4V using EDM for improving osteogenic response" at one week FDP on Recent Advances in Materials Science and Engineering organized by SVERI’s College of Engineering, Pandharpur (18th- 24th January, 2022) JAN 2022
4	July	2021	Delivered a talk on “Vibration Assisted Electric Discharge Machining” at STTP on Advances in Materials and Manufacturing Techniques, organized by Annasaheb Dange College of Engineering And Technology, Ashta (1st- 7th July. 2021) JULY 2021
5	July	2021	Delivered a talk on “Application of AI in Predicting Hybrid EDM machining Performance” at STTP on Advances in Materials and Manufacturing Techniques, organized by Annasaheb Dange College of Engineering And Technology, Ashta (1st- 7th July. 2021) JULY 2021
6	July	2021	Delivered a talk on “Surface Treatment of Biomedical Implants using EDM” at STTP on Advances in Materials and Manufacturing Techniques, organized by Annasaheb Dange College of Engineering And Technology, Ashta (1st- 7th July. 2021) JULY 2021
7	January	2021	Delivered a talk on “Applications of AI in Electro discharge Machining Based Processes” at FDP on Applications of Artificial Intelligence and Machine Learning in Mechanical Engineering, organized by KIT's College of Engg., Kolhapur (12th- 16th Jan. 2021) JAN 2021
8	January	2019	Delivered a talk on “Challenges and Opportunities in Electrical Discharge Machining” in a STTP on Recent Advances in Production Engineering organized by the Department of Mechanical Engineering at Manipal University, Jaipur. Jan.21st – 25th 2019. JAN 2019
9	December	2016	Delivered a talk on “Hybrid micro-machining processes” in a workshop on Advances in Manufacturing at Dr. Daulatrao Aher College of Engineering, Karad, Maharashtra. Dec.5th-10th 2016. DEC 2016
10	January	2015	Resource person for three days workshop on “Modelling and simulation of Automotive systems using MATLAB and Simulink” at Rajarambapu Institute of Technology, Rajaramnagar, Maharashtra. Jan. 26th to 28th Jan 2015. JAN 2015

Workshop attended

	Type	Month	Year	Information
1	Workshop	May	2017	Three days workshop on “Indian Nanoelectronics User Program (INUP) Familiarization Workshop”, from 22nd to 24th May, 2017 at IIT Bombay.
2	Workshop	April	2017	One day teacher training workshop on “E-learning: Challenges and Opportunities”, on 19th April, 2017 at HCM Rajasthan State Institute of Public Administration, Jaipur.
3	Short Term Course	December	2016	One week STTP on “Advances in Manufacturing” from 5th to 10th December, 2015 at Dr. Daulatrao Aher College of Engineering, Karad, Maharashtra.
4	Conference - National	December	2015	International Conference on Precision, Meso, Micro and Nano Engineering, IIT Bombay. 10th-12th Dec. 2015.
5	Conference - National	December	2014	5th International and 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2014), IIT Guwahati.
6	Short Term Course	March	2014	One Week STTP on “Micro-manufacturing and its application” from 30th Feb. 2014 to 4th March 2014 at Indian Institute of Technology, Kanpur.
7	Training	January	2014	Three days refresher course on “Microscopy”, 31st January to 2nd February, 2014, M.N.I.T. Jaipur.
8	Workshop	January	2013	One Week Programme on “Micro & Nano Technology”, 24th to 28th June, 2013, Organized by RIT, Sakharale.
9	Short Term Course	December	2012	One Week Faculty Development Program (FDP) on “Recent Trends in Precision Mechanical Measurements” from 26th November – 1th December 2012, under TEQIP-II, organized by Sinhgad College of Engineering, Pune.
10	Workshop	July	2012	Two Week Workshop on “Introduction to Research Methodologies" from 25th June - 4th July 2012, Conducted by IIT Bombay
11	Training	November	2011	International Conference of Industrial Engineering (ICIE), 17-19 Nov.2011, NIT Surat.
12	Training	February	2011	International Congress on Productivity, Quality, Reliability, Optimization and Modelling (ICPQROM), 7-8 Feb.2011, Delhi

Workshop conducted

	Type	Month	Year	Information
1	Workshop	December	2023	One week hands-on training workshop on "Solidworks: Theory and Practice" from 18th Dec. 2023 to 22nd Dec. 2023.
2	Workshop	October	2016	Three day Workshop on “CAD/CAM, CNC Programming and Training on 3-axis CNC Vertical Machining Centre” from 21st-23rd October 2016 at The LNM Institute of Information Technology, Jaipur

Research guidance

	Name	Roll No.	Title	Status
1	Pravin Omprakash Sharma	17PMM002	Pool Boiling Heat Transfer Enhancements through Fluid and Surface Modifications	Completed
2	Pravin Pandit Harane	17PMM001	Electro-Discharge Drilling of Waspaloy: Characterization and Performance Enhancement Strategies	Pursuing
3	Akshat Kulshrestha Shrivastav	18PMM002	Optimization & characterization of Process Parameters for Electric Discharge Face Grinding	Pursuing